Your new Nature's Head® combines all the advantages of composting-, dry- and separating toilets in one robust design and impresses with its light weight and easy installation.
Your Nature's Head® separating toilet comes with most of the components necessary for installation. This does not include the cover for the ventilation to the outside, as each application requires a different variant. Common are e.g. gill plates in various sizes (e.g. if you already have an old lead-through), for a new installation a size of approx. 6 cm diameter is sufficient. We would strongly recommend a fly screen or a comparable solution with gauze to make it impossible for insects to enter the ventilation hose.
Please observe the installation instructions regarding the ventilation area. Please feel free to contact us at any time if you have questions regarding your installation.
For some installation variants longer hose lengths might be required, for longer pieces the hose can also be replaced by commercially available PVC pipe. In this case, however, please note that a flexible piece of hose is required towards the toilet for service work (pulling off the hose to empty the solids tank).
If your installation has a floor construction other than wood, other fastening screws may be necessary. For installations on concrete floors or similar, you can alternatively fix the toilet on a piece of painted wood, which is firmly screwed or glued to the concrete.
If you want to operate the toilet on a 230 volt power supply (house connection), this can be done with the help of a power supply.
Quality: Made of robust PE with stainless steel fittings. Ergonomically shaped seat.
Operation and cleaning: After each use, operating the crank will mix the solids with coconut fibres. For cleaning, all you need is a spray bottle with vinegar solution.
Emptying: Empty urine bottle as needed. The solid container has a capacity of 60-80 toilet cycles.
If you want to install your Nature's Head in front of a wall without a gap to the rear for space reasons, you can simply remove the upper part of the rear hinge. The toilet head is held securely at all times by the snap locks on the sides!