You've got questions? We're here to help: Call +49 30 69 2005 100 or send us an E-Mail
The new OGO® is the result of intensive development work. It combines the advantages of a composting toilet with maximum comfort, a revised look and even less space requirement.
1.250,00 €
Not included in the delivery:
Quality: Made of high-quality polypropylene (PE). Ergonomically shaped seat.
Operation and cleaning: After each use, the solids are mixed with fine coconut husk fibres. With the OGO®, all you have to do is press the button for the electric agitator, it couldn't be more uncomplicated. For cleaning, all you need is a spray bottle with vinegar solution or diluted citric acid.
Emptying: Empty urine bottle as needed. The solid waste container has a capacity of up to 30 usages. Disposal as residual waste or on home compost (Must not be used as fertiliser for edible plants).
All required parts are supplied, except:
Venting / hose: For some installation variants, longer hose lengths might be required. In these cases, we recommend extending the supplied hose with a commercially available HT pipe DN40. You can also use this pipe as a wall duct for the exhaust air. Cut it to the right length (wall thickness + 5 cm) and glue it in place.Even if it is not absolutely necessary with the OGO®, it is recommended to always install a flexible piece of hose towards the toilet so that it can be pulled off for possible maintenance work.
Floor construction: Depending on the floor construction, you will need appropriate screws (4 pieces). Power connection: Ensure a 10A fuse and adequate cable thickness. If you want to operate the toilet on a 230 volt mains supply (house connection), this can be done with the help of a power supply unit. You will need a 12V 10A power supply unit with a 5.5 mm x 2.5 mm hollow plug, such as those used for monitors.
Power connection: Ensure a 10A fuse and adequate cable thickness. If you want to operate the toilet on a 230 volt mains supply (house connection), this can be done with the help of a power supply unit. You will need a 12V 10A power supply unit with a 5.5 mm x 2.5 mm hollow plug, such as those used for monitors.
Do you have questions about delivery or need help? Contact us at any time!